Release Date: 30.05.19

This is the mainboard firmware for using the "JG Titan MKII" Kit without modified Stepper Motor Drivers. Use this firmware if your A5 is in its original condition.

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 30.05.19

This is the mainboard firmware for using the "JG Titan MKII" Kit with TMC2130 stepper motor drivers on X and Y axis in SPI mode (note the pin assignment in pins.Ramps.h).

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 22.05.19

This is the mainboard firmware for using the "JG Titan MKII V2" Kit without modified Stepper Motor Drivers. Use this firmware if your A5 is in its original condition.

Changes:

• Optimized bed leveling
• PID Tuning optimized - silicone required

For details of the changed parameters, search for the tag "2.1.5" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 16.01.19

This is the mainboard firmware for using the "JG Titan MKII" Kit without modified Stepper Motor Drivers. Use this firmware if your A5 is in its original condition.

Changes:

• Optimized bed leveling
• PID Tuning optimized - silicone required

For details of the changed parameters, search for the tag "2.1.5" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 05.06.19

This is the mainboard firmware for using the "JG Titan MKII V2" Kit without modified Stepper Motor Drivers. Use this firmware if your A3S is in its original condition.

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 05.06.19

This is the mainboard firmware for using the "JG Titan MKII V2" Kit with TMC2130 stepper motor drivers on X and Y axis in SPI mode (note the pin assignment in pins.Ramps.h).

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 05.06.19

This is the mainboard firmware for using the "JG Titan MKII" Kit without modified Stepper Motor Drivers. Use this firmware if your A3S is in its original condition.

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 05.06.19

This is the mainboard firmware for using the "JG Titan MKII" Kit with TMC2130 stepper motor drivers on X and Y axis in SPI mode (note the pin assignment in pins.Ramps.h).

Changes:

• Based on Marlin 1.1.9C
• Integrated "Linear Advance" feature
• CompleteChange Log

For details of the changed parameters, search for the tag "2.2.0" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 04.11.18

This is the mainboard firmware for using the "JG Titan MKII" Kit without TMC2130 Stepper Motor Driver. Use this firmware if your A5 is in its original condition.

Changes:

• Optimized bed leveling
• Adapted overheating protection - no "thermal runaway"
• PID Tuning optimized - silicone cover recommended

For details of the changed parameters, search for the tag "2.1.4" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

Release Date: 04.11.18

This is the mainboard firmware for using the "JG Titan MKII" kit with TMC2130 stepper driver on X and Y axis. Use this firmware if your A5 is equipped with TMC210 modules on X and Y axis.

Changes:

• Optimized bed leveling
• Adapted overheating protection - no "thermal runaway"
• PID Tuning optimized - silicone cover recommended

For details of the changed parameters, search for the tag "2.1.4" in the firmware files "Configuration.h" & "Configuration_adv.h".

> Download

If you use your own firmware based on Marlin 1.1.8C, you can implement our IR sensor through the following code changes:

(The number before the code is the line specification, which does not necessarily have to match exactly)